11
Introduce Yourself / Re: Long time lurker, first time poster
« Last post by ketel3 on March 01, 2023, 06:09:48 PM »And , any luck ?
Recent Posts
12
Introduce Yourself / Re: Long time lurker, first time poster
« Last post by northernbrewer on February 25, 2023, 06:55:50 PM »I shall give him a bell and hopefully he has something.
Shame about the spam. Seems to plague all the forums now
Shame about the spam. Seems to plague all the forums now
13
Introduce Yourself / Re: Long time lurker, first time poster
« Last post by ketel3 on February 25, 2023, 02:43:22 PM »Maybe you can send a PM to Edwin.
I know he had some parts laying around.
Unfortunate Lioyd moved back to the US and very busy with renovating a house.
By the way we had so many spammers that the forum no longer is open for everyone.
I know he had some parts laying around.
Unfortunate Lioyd moved back to the US and very busy with renovating a house.
By the way we had so many spammers that the forum no longer is open for everyone.
14
Introduce Yourself / Long time lurker, first time poster
« Last post by northernbrewer on February 20, 2023, 08:49:22 PM »Seems this forum is unfortunately a bit quiet these days but who knows, maybe someone left might be able to help me out.
I am wanting to build a rgb eparrot, however it appears that robotdyn is no longer around. I was wondering if anyone might have a RGB LCD shield and data logging shield they might be willing to sell? I have already had the case and pcbs ordered before I discovered robotdyn was gone.
I am wanting to build a rgb eparrot, however it appears that robotdyn is no longer around. I was wondering if anyone might have a RGB LCD shield and data logging shield they might be willing to sell? I have already had the case and pcbs ordered before I discovered robotdyn was gone.
15
Parts Drag & Drop / Re: The Old Drag and Drop
« Last post by ShiFu on August 21, 2021, 01:06:01 AM »Sorry, the Old Drag and Drop flash files got deleted when I upgraded stillsales.com a couple of years ago.
It may take forever to find the original files, if they still exist.
It was fun while it lasted.
If I stumble across the original files I'll try to re-post them here.
It may take forever to find the original files, if they still exist.
It was fun while it lasted.
If I stumble across the original files I'll try to re-post them here.
16
Tried and Proven Builds / Re: The RGB - World's Most Advanced eParrot
« Last post by ShiFu on August 21, 2021, 12:17:42 AM »Please be aware that I do not sell Anything to Anybody.
That includes eParrot kits and parts.
That includes eParrot kits and parts.
17
Still Automation / Re: Hello Distiller.....the Russian controller that does it ALL
« Last post by ketel3 on July 10, 2021, 05:02:03 PM »Here a movie about the Hello Distiller controller and a continue distilation set up.use translator to get Eng.sub.
18
Still Automation / Re: Hello Distiller.....the Russian controller that does it ALL
« Last post by ketel3 on March 08, 2021, 11:10:57 PM »But the controller has more options,if you only want a safety warning or shut off the power to the heaters in case the pressure for whatever reason is to high into the boiler there is simpel way.
You can use a simple analoge pressure meter with build in electrical contact.
This meters have a adjustable needle for the setpoint,so you can adjust the allowed pressure by this.
Just a wire is needed from the pressure meter contact to the NBK / PVC connector of the controller , if the pressure rises to the alarm level setpoint the power to the heaters will be disconnected.
The cable with connector is available on HelloDistillers webshop or local electronic shop.
These pressure meters are available over a large range ,for a simple setup choose a meter into the range 0 to 0,25 Mpa will be ok .
Or into the range 0 to 0,16 Mpa, or the value that fits to your boiler and column.
I will include a picture, prices on Aliexpress about $10 incl shipping.
You can use a simple analoge pressure meter with build in electrical contact.
This meters have a adjustable needle for the setpoint,so you can adjust the allowed pressure by this.
Just a wire is needed from the pressure meter contact to the NBK / PVC connector of the controller , if the pressure rises to the alarm level setpoint the power to the heaters will be disconnected.
The cable with connector is available on HelloDistillers webshop or local electronic shop.
These pressure meters are available over a large range ,for a simple setup choose a meter into the range 0 to 0,25 Mpa will be ok .
Or into the range 0 to 0,16 Mpa, or the value that fits to your boiler and column.
I will include a picture, prices on Aliexpress about $10 incl shipping.
19
Still Automation / Re: Hello Distiller.....the Russian controller that does it ALL
« Last post by ketel3 on March 08, 2021, 10:54:01 PM »The controller has a function known as pressure control,not only as a safety feature,but also for a special way of distillation known as emulsification .
With emulsification you can build a continue distilling system controlled by pressure to make very clean distillate.
The pressure sensor is plugged into the controller by a usb cable.
I add a picture of this sensor.
You can change settings directly into the android app.
https://hellodistiller.ru/market/soputstvuyuwie_tovary/datchik_davleniya_v_kube/ (use google translator)
With emulsification you can build a continue distilling system controlled by pressure to make very clean distillate.
The pressure sensor is plugged into the controller by a usb cable.
I add a picture of this sensor.
You can change settings directly into the android app.
https://hellodistiller.ru/market/soputstvuyuwie_tovary/datchik_davleniya_v_kube/ (use google translator)
20
Still Automation / Re: Hello Distiller.....the Russian controller that does it ALL
« Last post by ketel3 on January 12, 2021, 11:25:56 PM »UPDATE
The work of Maxim and HelloDistiller will be continued.
So production has started again, support is available,and for people that use it , the server for remote control is running,but you can also run with blue tooth , wifi direct, or wifi over your router.
For orders or info .
https://hellodistiller.ru use Google translator.
The work of Maxim and HelloDistiller will be continued.
So production has started again, support is available,and for people that use it , the server for remote control is running,but you can also run with blue tooth , wifi direct, or wifi over your router.
For orders or info .
https://hellodistiller.ru use Google translator.